Common mistakes in 3D Eyelash
While loving beauty, we should pay attention to the harm brought by the beauty of appearance to our health. In order to reduce the harm caused by love and beauty, we should pay attention to the mink eyelashes to bring pain. First of all, we have to recognize the most common mistakes we make during the use of mink eyelashes 3D Eyelash.
One, worry about using too many money, as far as possible to prolong the life of mink eyelashes or to buy very cheap false eyelashes;
Two, some people directly apply the glue on the eyelids. Some people want to make eyelashes thicker. One sticky is two or three layers. They stick for a long time, and are stimulated by glue for a long time, and the pulling when they are removed. They are prone to allergic contact dermatitis, and their eyes are red and swollen.
Three. Use oily skin care products or wash your face after 24 hours (only water is not! ). On the other hand, when you want to remove the mink eyelashes, use makeup oil or olive oil on the root of the eyelashes can be easily removed.
Four, wait until the glue is dry. Most of the glue is white in the beginning, but it’s transparent when it’s dry, so don’t worry about the white residue 3D Eyelash.
Five, worry about the glue dry so after squeezing out, immediately touch. We suggest that the lash root be covered with glue for 5 seconds and wait for the lash root when the glue is half dry. The time is just dry, firmly attached mink eyelashes to the root of the eyelashes. If the glue is very wet, it is put on the root of the eyelash. There is no effective glue that can not play a reinforcing role, and the tweezers loose , mink eyelashes will fall off.
Six, the use of mink eyelashes before the eye is not thoroughly cleaned, if oil around the eye, it will affect the durability of the glue.Thank you for your interest in3D Eyelash. Please tell us how we can assist you and we will make our best efforts to reply within 24 hours.
Regardless of which type of lash glue you prefer, the application process is almost exactly the same. The trick is not to over apply the glue and to let it get a little bit tacky before you attach the 3D Eyelash.
ash to your natural false eyelashes 3D Eyelashes line. Over application prevents the glue from getting appropriately tacky so it makes a sloppy mess when you attempt to stick false eyelashes on your eyelid. There are two ways to control the amount of glue that you use. The first is to use tools to apply the glue to the false eyelashes, and the second is to put the glue directly onto your lid.
In order to place the glue onto your false eyelashes, you’ll need a tool that will allow you to put a fine line of glue onto the strip of the lash. You can use the back of a pair of tweezers, an old makeup brush, or even a cotton swab. Squeeze some glue out onto the tool and carefully dab a very small amount of glue down the entire strip of the false eyelashes. Alternatively, you can place a small amount of glue on your hand or on a hard surface and dab the lash into the glue 3D Eyelash.
Once the glue is on the lash, let the glue dry until it’s sticky. The white glue will turn slightly clear, whereas the black glue will remain black and you’ll have to feel the lash until you get a feel for how long it takes. Once the glue is tacky, it’s time to apply the lash to your false eyelashes 3D Eyelashes 3D Eyelash.
The best way to apply the strip lashes to your eye is to first put on any makeup you’ll be wearing except mascara. Then use a pair of tweezers to stick the false eyelash onto your eyelid, center first. The tacky glue should make this easy. Then simply push the outer and inner corners onto your lid as well. If you’ve used white glue, you may have to touch up your makeup to hide any shiny patches or gaps in the lashes. If you’ve used the black glue, there shouldn’t be a need for adding more makeup. Finally, gently squeeze the false eyelashes into your false eyelashes with your fingers and then add mascara and you’re good to go!
Maquillage Lashes Company
NO.57 HairRaod , 2760000, Qingdao, China